NEWS CENTER
|news center|
-
GCr15SiMn Bearing Tube
The full name of GCr15SiMn bearing steel is called GCr15SiMn rolling bearing steel, which has high compressive strength and fatigue limit, high ha ...
2019-05-22
-
100CrMnSi6-4 Bearing Tube
100CrMnSi6-4 bearing steel is based on GCr15 steel, and the Si and Mn contents are appropriately increased to improve the hardenability and elasti ...
2019-05-22
-
P265GH Steel
P265GH is a weld able pressure vessel and boiler steel for high temperature service, and it is typically used in power generation, oil and gas, pe ...
2019-05-16
-
GCr15 Steel
GCr15 bearing steel is used in the manufacture of various bearing rings and rolling elements. ...
2019-05-16
-
AISI E52100 Bearing steel
E52100 Bearing steel is Suitable for manufacturing military bearing products, special bearings, aviation engine bearings, precision instruments, p ...
2019-05-16
-
20G Boiler Tube
20G is an economical section steel and is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes, automo ...
2019-05-08
-
15crmog Boiler Tube
15CrMo steel is mainly used for high and medium pressure pipes and steam pipes with a steam parameter of 510 ° C, and heat pipe with a wall tempe ...
2019-05-08
-
12cr1movG Alloy tube
The 12Cr1MoV alloy tube is based on high-quality carbon structural steel, and one or several alloying elements are appropriately added to improve ...
2019-05-08
-
4140 petroleum tube
4140 has good strength and good comprehensive mechanical properties, good manufacturability and finished product rate after heat treatment. ...
2019-04-26
-
37Mn5 Petroleum steel
The 37Mn5 steel pipe is a J55 steel pipe, which is commonly used for oil well drilling and it is also as a raw material for rolling anchors. ...
2019-04-26
-
EN 10083 42CrMo4 Steel
42CrMo4 has high strength, high hardenability, good toughness, small deformation during quenching, high creep strength and long-lasting strength a ...
2019-04-16
-
37CrMnMo Alloy steel
The main grades of steel for oil drilling tools and brazing tools are: EX30, SN2025, 4145H, 37CrMnMo, FF710, K24729, etc. ...
2019-04-16
-
GB/T 3077 30CrMnSiA alloy steel
30CrMnSiA is a medium carbon with high strength. 30CrMnSiA has high strength，good hardenability and sufficient toughness after quenching and temper ...
2019-04-10
-
20MnVB hardened steel
20MnVB is a kind of carburized steel with better performance. The characteristics of 20MnVB steel are similar to those of 20CrMnTi and 20CrNi stee ...
2019-04-09
-
27SiMn pipe for boiler
The performance of 27SiMn steel is better than that of 30Mn2 steel, the hardenability is higher, the critical hardening diameter in water is 8~22 ...
2019-04-04
-
20CrMnTiH Gear steel
20CrMnTiH gear steel is used to manufacture important parts such as gears, ring gears, gear shafts and crossheads that are subjected to high-speed ...
2019-04-04
-
SNCM439 Steel Official Price
Heat treatment specification: quenching 850 ° C, oil cooling; tempering 600 ° C, water cooling, oil cooling. ...
2019-03-26
-
60CrMnBA Steel
60CrMnBA spring steel has higher strength, ductility and toughness, better hardenability, lower sensitivity than manganese steel and higher than s ...
2019-03-26