NEWS CENTER
|news center|
-
GB/T 3087 is a key standard for
GB/T 3087 is a key standard for seamless steel pipes in China's national standards. It specifies in detail the requirements for seamless steel ...
2024-08-08
-
The ASTM A53/A53M is seamless st
The ASTM A53/A53M standard is a specification formulated by the American Society for Testing and Materials (ASTM) on the manufacturing, testing, p ...
2024-08-01
-
GB/T 9711 PSL1 refers to steel p
GB/T 9711 PSL1 refers to steel pipes for oil and natural gas industry transmission pipelines manufactured in accordance with Chinese national stan ...
2024-07-25
-
HARDOX is a high-strength and we
HARDOX is a trademark and pand series of Hardox, and it is also a high-strength and wear-resistant weathering steel material. HARDOX wear-resistan ...
2024-07-19
-
GB/T 24186 is the national stand
GB/T 24186 is the national standard for high-strength wear-resistant steel plates and steel strips for construction machinery. This standard stipu ...
2024-07-19
-
EN10028-3 is a part of the Europ
EN10028-3 is a part of the European standard for steel flat products for pressure vessels and specifies the requirements for normalized weldable f ...
2024-07-05
-
ASTM A516 is a steel plate
ASTM A516 is a steel plate standard developed by the American Society for Testing and Materials (ASTM International). This standard is primarily u ...
2024-06-28
-
ASME SA588 weathering steel plat
ASME SA588 weathering steel plate is a high-strength low-alloy structural steel, with a minimum yield point of up to 50 ksi (345 MPa). This steel ...
2024-06-21
-
HG785D steel plate performance i
HG785D is a kind of high-strength welded structural steel, where "785" means that the tensile strength of the steel plate is about 785Mpa, and "D" ...
2024-06-13
-
Various performance parameters o
P235GH is a European standard container plate, mainly used to manufacture various pressure vessels, such as storage tanks, reactors, heat exchange ...
2024-06-05
-
30Performance analysis of Cr12 d
Cr12 die steel is one of the representative grades of high carbon and high chromium cold working die steel. C2.00% ~ 2.30% and cr11.00% ~ 13.00% w ...
2020-02-10
-
Heat treatment of tool steel
Tool steel is used to make cutting tools, measuring tools, molds and wear-resistant tools. Tool steel has high hardness and can keep high hardness ...
2020-02-10
-
5CrNiMo tool steel has good toug
The mechanical properties of 5CrNiMo tool steel are almost the same at room temperature and 500-600 ℃. When heated to 500 ℃, the hardness of hb3 ...
2020-02-10
-
The 1.2343/H11/SKD6 Alloy Steel
Steel is the three most common hot pressing and casting industries in Europe. 1.2343/H11/SKD6 Alloy Steel Round Bar has good die steel, carbide, s ...
2020-02-04
-
How to improve the quality of di
1. In order to improve the mechanical properties of die steel, the modification of inclusions by Ca, re and other trace elements is used to change ...
2020-02-01
-
SKD11 Alloy Tool Steel
SKD11 material is a kind of high-carbon high-chromium alloy tool steel. It has high hardness and abrasion resistance after heat treatment, and has ...
2019-12-12
-
Quality 1.2312 Mold Steel Plates
Quality 1.2312 is plastic mold steel to cross-sections up to 400 mm for plastic- and die casting-molds with medium dimensions. 1.2312 steel is hig ...
2019-11-14
-
What are the Chemical Elements o
P20 die steel is suitable for large and medium-sized precision molds. It is suitable for long-term production of high-quality plastic molds for la ...
2019-11-05